Search for a Selmer AS711 and you'll find two different saxophones, so start with the letters. The SAS711 is the Selmer one, and Conn-Selmer calls it an entry-level professional alto, the next generation of collaboration between Selmer USA and Henri Selmer Paris. It replaced the AS42, which dealers describe as the first horn from that partnership, and the Schmitt Music sax shop introduced the new version in early 2021 as a French and Taiwanese hybrid. The French part is the neck. Henri Selmer Paris makes the neck for this horn and supplies its AM42 mouthpiece, and Conn-Selmer says it's the only horn in its class with a genuine Paris neck. The body has ribbed construction, Mark VI style hand engraving, blued steel springs and Pisoni Pro leather pads with metal resonators, the sort of spec dealers point out is common on professional horns and rare on student ones. The other AS711 is the Prelude by Conn-Selmer, a student alto for beginning band. It's a fine starter, but it isn't this horn, so look for SAS711, the engraved bell and the Paris neck.
AS42, the earlier Selmer USA and Henri Selmer Paris alto the SAS711 replacedSAS711S, silver-platedPrelude AS711 by Conn-Selmer, an unrelated student alto with the same number
Who it suits
More than a beginner needs. It suits a high school player stepping up from a student alto, or an adult who wants a near-pro horn, and the Paris neck is a big part of what you're buying, so make sure it's included.
Spec at a glance
Brand
Conn-Selmer
Model
SAS711
Type
Saxophone (woodwind)
Level
Step-up
Key
E-flat alto
Made in
Taiwan (body), with a neck and mouthpiece made by Henri Selmer Paris
Typical eBay ask (Oct 12, 2026)
$3,875–$4,200
Build and caseSAS711
Body
Yellow brass body, neck and bell; post-to-rib-to-body construction; drawn tone holes; Mark VI style hand engraving
Keywork
High F# key; F vibration dampening bar; C# correction mechanism; blued steel springs; Pisoni Pro leather pads with metal resonators; metal adjustable thumb hook
Finish
Clear lacquer (SAS711) or silver plate (SAS711S)
In the case
Henri Selmer Paris AM42 mouthpiece and a BAM lightweight backpack case
How to date one
Conn-Selmer publishes no serial table for Selmer USA saxophones, and the Selmer Paris chart doesn't apply, so a serial won't date one. Schmitt Music showed the SAS711 as the new version of the AS42 in early 2021, so a horn sold as an SAS711 is from about then on.
What to check before you buy
The Paris neck is what sets this horn apart, so a listing without it, or with a student neck swapped in, is a different horn. The pads and springs are pro-grade, but a used one still needs the usual check for dried pads and lost adjustment.
01Model letters: Check the listing and the body stamp for SAS711, and look at the bell engraving. A Prelude AS711 is a plain student horn, while the SAS711 has the hand-engraved bell.
02Paris neck: Ask the seller to confirm the neck is the original Henri Selmer Paris one and to photograph it from the side. It should match the body's finish and have a smooth, round bend with no dents.
03Engraving and finish: Look at the bell engraving in the photos. Crisp engraving under even lacquer means original finish, while soft, blurry engraving or drips suggest a relacquer.
04Low notes: Ask for a short video playing low C, B and B-flat softly. Each note should speak cleanly without a hard push.
05Pads and resonators: Zoom in on the pads in the photos. They should be matching brown leather with metal resonators, with no tears or hardened rings.
06Dents and posts: Check the body, bow and bell in the photos for dents near tone holes and for posts pushed in. A few dings on the bow are normal, but a dent at a tone hole needs a shop.
07In the case: Look for the AM42 mouthpiece, cap, ligature and the backpack case in the photos. Fold any missing piece into your offer.
This page is the Selmer SAS711, the step-up alto with a neck made by Henri Selmer Paris, not the Prelude AS711 student horn by Conn-Selmer that shares the number. There are at least 5 for sale and four are new, so the $3,875–4,200 band is new dealer pricing, not a used market read, with lacquer ones at $3,899 and black nickel or matte ones at $4,199, all with free shipping. The one used SAS711 asks $2,319 from a US dealer, about $1,580 under new, and it's the one we'd look at, but its photo is the same stock image as the dealer's new listing, so ask for photos of the actual horn and confirm the Paris neck and AM42 mouthpiece are there. It suits a high school player stepping up from a student alto, while a child starting band does fine on a YAS-26 or AS500 for far less.
Listed now
5
For parts
0
Typical ask
$3,875–$4,200
Full range
$2,319–$4,199
★Cheapest
$2,319.35delivered
The only used SAS711 for sale, at $2,319 with free shipping from a 99.6% US dealer, about $1,580 under a new lacquer one. The photo is the dealer's stock image, so ask for photos of this horn and confirm the Paris neck and AM42 mouthpiece come with it.
If you'd rather buy new, this lacquer one at $3,899 with free shipping from a 99.8% US dealer is tied for the lowest new ask. A new SAS711 comes with the Paris neck, an AM42 mouthpiece and a backpack case.
Selmer SAS711 Professional Alto Saxophone - Lacquer
Delivered prices include shipping as eBay quoted it to a US address on Oct 12, 2026. Many sellers charge by distance, so your total may differ. eBay shows yours before you pay.
Snapshot
For sale on eBay
5 of 5 listed
Checked . Some may have sold.
Delivered prices include shipping as eBay quoted it to a US address on Oct 12, 2026. Many sellers charge by distance, so your total may differ. eBay shows yours before you pay.
Used
★Cheapest
Selmer SAS711 Alto Saxophone
$2,319.35delivered
$2,319.35 · free shipping
Buy It Now$2,319.35
Good buy
The only used one. Stock photo, so ask for real photos and confirm the Paris neck.